Happy Halloween, and a peaceful Undas to you and your family. Shop safely online
Price history: ₱5,504 every time we've checked since Nov 1. We'll show changes here.
Buy at ShopeePrice last checked Nov 1, 2026. It may have changed, so confirm on the store's page. We earn a commission on purchases (details).
TLHS240-2 TopGrade Cylindrical Lockset Double Handle Colors: Satin Nickel • Antique Brass Single Cylinder •Wrap the paper or cardboard template that comes with the new lockset around the edge of the door according to manufacturer's instructions. •If necessary, use tape to secure the template. Template will be used to locate two holes: one hole for lock cylinder and the other for edge of door for bolt. Mark centers for these two holes on door. • Use a power drill with hole-saw attachment to drill hole the size specified for lock cylinder. Be careful not to damage the veneer on the opposite side of door. When you see the point of the drill coming through, stop and finish boring from other side. • Drill a hole the appropriate size for the bolt into the edge of door until you reach the cylinder hole. Use the combination square against the edge of the door and the drill bit to keep the bit at a right angle to the door. Smooth edges of holes with sandpaper. • Insert the bolt into the hole, and place the bolt plate in position over it. Trace the bolt plate's outline on the edge of door. Follow the manufacturer's instructions to remove the bolt and mortise edge for the bolt plate so it wil be flush with the surface. • Use a chisel to cut the mortise. Insert the bolt and plate in the mortise, and drill the pilot holes for mounting screws. Install the screws to secure the bolt in place. • Insert the outside lock cylinder so the stems or connecting bar fits into the bolt assembly. Attach the interior lock cylinder, and secure it with the screws. • Locate the proper spot for the strike plate on the jamb, and drill the proper-size hole in the jamb. Using the strike plate as a pattern, mark the jamb for mortising, and cut the mortise. Install the strike plate with screws so it fits flush with the jamb.
