Price last checked Oct 28, 2026. It may have changed, so confirm on the store's page. We earn a commission on purchases (details).
eyewash shower set 2 ways water inlet , as our pic shows The compound emergency eye washing device is widely used in the dangerous working areas and laboratories of pharmaceutical, chemical, petrochemical, electronic and semiconductor enterprises. When a chemical liquid or toxic substance splashes on the body, face, eyes of the staff or a fire causes the clothing of the staff to catch fire, the device can quickly reduce the harm to the lowest level and reduce the harm of the toxic substance to the staff Performance parameters: Nominal pressure: 0.4MPa Sealing pressure: 0.45MPa Working pressure: 0.20 ~ 0.40MPa Spray flow L / min: 120-180 Eyewash flow L / min: ≥ 12 Applicable conditions: pure water at room temperature or water meeting the sanitary standard Structural features: 1. Use ball valve to control spray and eye wash respectively. Convenient operation, fast opening and closing, reliable sealing. 2. the outlet of the sprinkler nozzle is a soft foaming water flow, which improves the cleaning efficiency by 50% compared with the common eye washing nozzle. 3. It is super resistant to the corrosion of acid, alkali, salt, oil and other chemicals. Installation and commissioning: 1. The product model, certificate, instruction manual and packing list shall be rechecked before installation. 2. The installation position shall be within 15 meters from the accident prone place, and the flushing place can be reached within 10 seconds at the running speed. 3. Installation and commissioning: A. connection between the base and the lower part of the riser: screw the raw material belt around the base thread to connect with the water outlet tee. B. installation of base: adjust the direction of tee drainage outlet according to the position of drainage pipe, mark the drilling position according to the screw hole of base, and then set M10 expansion screw or anchor bolt according to the ground level. C. install the flushing pipeline: screw the flushing nozzle on the elbow of the horizo