Happy Halloween, and a peaceful Undas to you and your family. Shop safely online
Discount is calculated from the original price the store lists, which may not reflect what other shops charge.
Price history: ₱5,399 every time we've checked since Oct 12. We'll show changes here.
Buy at ShopeePrice last checked Oct 27, 2026. It may have changed, so confirm on the store's page. We earn a commission on purchases (details).
﹊﹋﹊﹊﹋﹊﹋﹊﹋﹊ ✨𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬✨ ﹊﹋﹊﹊﹋﹊﹋﹊﹋﹊ 【GOOD BENDING EFFECT】- The pipe bender can bend the pipe with a thickness of 0.07 -0.19 inch into a 90-degree angle, which can help you save energy and time, reducing the workload and increasing work efficiency. 【DUCTILE IRON MODEL】- The dies are made of ductile iron with higher strength, better toughness, and plasticity than ordinary gray cast iron. 【ADJUSTABLE TUBE SIZE】- There are six models of different sizes to suit different sizes of tubes, respectively 13mm, 16mm, 19mm, 22mm, 28mm, 34mm (1/4in, 5/16in, 3/8in, 1/2in, 3/4in, 1in) to meet your various needs. 【ERGONOMIC DESIGN】- The handle is equipped with an anti-skid rubber handle to increase friction and avoid falling off during operation. It also comes with removable pulleys. You can carry it anywhere without any trouble. 【WIDE APPLICATIONS】-This copper pipe bender is suitable for various materials, copper, brass, aluminum, and steel, and it is also used in construction sites, plumbing jobs, shipping, etc. ﹊﹋﹊﹊﹋﹊﹋﹊﹋﹊ 🔅𝐏𝐫𝐨𝐝𝐮𝐜𝐭 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧🔅 ﹊﹋﹊﹊﹋﹊﹋﹊﹋﹊ Model: SWG - 1 Material: nodular cast iron Stroke: 170mm Output: 10T Pipe wall thickness: 2-3.5mm Mold type: 1/4″, 5/16″, 3/8″, 1/2″, 3/4″ (Corresponding diameter: Φ13 , Φ16 , Φ19 , Φ22 , Φ28 , Φ34) Weight (kg): 20 Suitable for pipes with Φ13mm-Φ34mm Only for round pipe, not for square pipe Method of use: A) first fixed base. B) according to the required bend size to select the mold and roller. C)when using insert the mold into the shaft on the base, then set the bracket into the axle, then put the wheel in the location section, bolted permanently. D) transfer bracket to wave plate, bent pipes are inserted between the mold and the roller, adjust the nut, and let mold, tube, and wheel joint. Then turn the handle. ﹊﹋﹊﹊﹋﹊﹋﹊﹋﹊ 🌼𝐖𝐀𝐑𝐑𝐀𝐍𝐓𝐘 𝐏𝐑𝐎𝐆𝐑𝐀𝐌🌼 ﹊﹋﹊﹊﹋﹊﹋﹊﹋﹊ 1. For SWG-1, The air vent must be loosened when using, otherwise, it will cause oil seal leakage. Only for round pipe, not for square pipe 2. Please be careful while using it to avo
